How to Replace a Toilet Seat | Ask This Old House

Build It
In this video, This Old House plumbing and heating expert Richard Trethewey shows us how to replace a toilet seat, explaining the standard shapes of seats and the potential problems a DIYer might encounter.

SUBSCRIBE to This Old House: http://bit.ly/SubscribeThisOldHouse.

Plumbing and heating expert Richard Trethewey puts the mystery behind toilet seat replacements to rest. Richard shows host Kevin O’Connor how simple toilet seat replacements have become, with standard sizes and bolt patterns. He even explains how corrosion-free plastic hardware is very easy to work with during installation.

Difficulty: ⅕
Cost: Under $50 in most cases
Time: Under 1 hour

Toilet Seat Standards
Toilet seats come in two standard varieties: oval and round. All oval toilet seats will fit oval toilets, and all round seats fit round toilets. The spacing of the bolts that hold these seats to the toilet are also standard, so the only consideration to think of is the shape of the toilet.

How to Replace a Toilet Seat
1. There are two caps on the back of the toilet seat on either side. Use a flat screwdriver to pop these caps off to gain access to the bolt.
2. Look underneath the toilet seat and find the plastic nuts holding the seat in place. Use the pliers to get a grip on one of the nuts. There’s no need to squeeze too tightly; medium pressure will do.
3. Return to the top of the toilet and use the widest screwdriver possible to loosen the bolt while still holding the nut underneath. The nut will usually loosen easily after the first few turns, so the pliers may become unnecessary.
4. Repeat the process on the other bolt. Pull up on the toilet seat to remove it.
5. Place the new toilet seat on the toilet, and pass the bolts through the holes. Many seats have plastic barbs to help keep the bracket in place. Push them through the bolt holes as well.
6. Place the new plastic nut on the bolt and thread it on by hand. Once snug, tighten the bolt with the screwdriver, but do not over-tighten.
7. Repeat the process on the other side and press the plastic caps down over the bolts.

How to Remove Corroded Toilet Seat Bolts
Older toilet seat bolts and nuts were metal, and they could fuse together due to corrosion from moisture and urine. Here’s how to remove them.

1. Place a piece of duct tape on the toilet to protect it.
2. Lay a putty knife on the tape and hold it flat against the toilet.
3. Pass the hacksaw back and forth to cut through the plastic hinge and eventually through the bolt.
4. Remove the toilet seat and tap the cut bolt through the toilet.

Where to find it?
Richard demonstrates how to replace an old or damaged toilet seat. When installing a new seat the first step is to determine what size toilet seat you need, be sure to use the right size seat to match the existing toilet.

Looking for more step by step guidance on how to complete projects around the house? Join This Old House Insider to stream over 1,000 episodes commercial-free: https://bit.ly/2GPiYbH

Plus, download our FREE app for full-episode streaming to your connected TV, phone or tablet: https://www.thisoldhouse.com/pages/streaming-app

Materials:
Duct tape [https://amzn.to/3PrDM89]
Toilet seat [https://amzn.to/3MB6emb]

Tools:
Screwdriver [https://amzn.to/3lrXxOT]
Pliers [https://amzn.to/3aeybBW]
Wrench [https://amzn.to/3lpV0VE]
Putty knife [https://amzn.to/3wLvU94]
Small hacksaw [https://amzn.to/3sMdGmx]

About Ask This Old House TV:
From the makers of This Old House, America’s first and most trusted home improvement show, Ask This Old House answers the steady stream of home improvement questions asked by viewers across the United States. Covering topics from landscaping to electrical to HVAC and plumbing to painting and more. Ask This Old House features the experts from This Old House, including general contractor Tom Silva, plumbing and heating expert Richard Trethewey, landscape contractor Jenn Nawada, master carpenter Norm Abram, and host Kevin O’Connor. ASK This Old House helps you protect and preserve your greatest investment—your home.

Follow This Old House:
Facebook: http://bit.ly/ThisOldHouseFB
Twitter: http://bit.ly/ThisOldHouseTwitter
Pinterest: http://bit.ly/ThisOldHousePinterest
Instagram: http://bit.ly/ThisOldHouseIG

How to Replace a Toilet Seat | Ask This Old House
https://www.youtube.com/user/thisoldhouse/

Products You May Like

Articles You May Like

My Favorite Trim Combo For Beautiful Baseboards (Plus, A Bit Of Remodeling Absurdity)
I Tested The BEST DIY Fade Resistant Plant Labels!
Install an electronic deadbolt #shorts #diy #deadbolt
Do it Yourself Outdoor Kitchen | Blending Backyard Makeover How-to’s
How to Update a Dated Home Without Remodeling

Leave a Reply

Your email address will not be published. Required fields are marked *